Last updated on May 30th, 2024 at 10:25 pm
Directorate of Technical Education (HP) Sundernagar Recruitment 2022 for 81 Trainer Vacancy. | Latest 2022-23 Govt Employment Jobs Notification for DTE HP. Himachal-pradesh Govt Jobs
DTE HP Recruitment 2022: Vacancy for 81 Trainer.
DTE HP Recruitment 2022 → Apply Online for 81 Trainer Vacancies: DTC HP -Directorate of Technical Education (DTC HP) has displayed 81 vacant seats for Trainer posts purely on temporary basis. Candidates satisfying the desired eligibility conditions as mentioned in the DTC HP official notification can submit their online application on with the help details mentioned below-
NOTE:- Candidates are advised to thoroughly read the original DTC HP job notification before applying for the desired post.
-Subscribe our HP job portal for govt jobs 2022 or sarkari naukri in Himachal Pradesh.
| Organization Name | DTE HP |
| Total Vacancies | 81 |
| Name of the Posts | Trainer, Turner |
| Pay Scale | See below table |
| Apply Mode | Online |
| Job Type | Himachal-pradesh |
| Job Location | Sundernagar Mandi |
| Work Experience | Visit notification |
| Post Code | Name of the Post | Nos of Posts (For Diploma /Degree) | Nos of Posts (For NTC/ CTI) |
|---|---|---|---|
| 101 | Trainer Electrician | 6 | – |
| 102 | – | 7 | |
| 103 | Trainer Mechanic Diesel | 2 | – |
| 104 | – | 3 | |
| 105 | Trainer Mechanic Motor Vehicle | 5 | – |
| 106 | – | 5 | |
| 107 | Trainer Plumber | 1 | – |
| 108 | – | 3 | |
| 109 | Trainer Dress Making | – | 1 |
| 110 | Trainer Employability Skill | 5 | – |
| 111 | Trainer Surveyor | 4 | – |
| 112 | Trainer Pump Operator-Cum-Mechanic | 1 | – |
| 113 | – | 2 | |
| 114 | Trainer Computer Operator and Programming Assistant | 1 | – |
| 115 | – | 1 | |
| 116 | Trainer Maths / Engg. Drawing | 1 | – |
| 117 | Trainer Engineering Drawing | 5 | – |
| 118 | Trainer Maths | 4 | – |
| 119 | Trainer IT/ Computer Lab. | 2 | – |
| 120 | Trainer Stenographer Secretarial Assistant (Hindi) | – | 2 |
| 121 | Trainer Sewing Technology | 1 | – |
| 122 | Trainer Surface Ornamentation Techniques (Embroidery) | 1 | – |
| 123 | Trainer Basic Cosmetology | 1 | – |
| 124 | Trainer Front Office Assistant | 1 | – |
| 125 | Trainer Draughtsman (Civil) | 1 | – |
| 126 | 3 | – | |
| 127 | Trainer Stenographer Secretarial Assistant (English) | – | 1 |
| 128 | Trainer Information and Communication Technology System Maintenance | 2 | – |
| 129 | Trainer Fashion Design & Technology | 1 | – |
| 130 | Trainer Fitter | 3 | |
| 131 | – | 3 | |
| 132 | Trainer Mechanic Electronic | – | 1 |
| 25 | Trainer Turner | – | 1 |
| Total | 49 | 33 | |
| Grand Total | 81 | ||
| Name of the Post: | Pay Scale: |
| Trainer | Rs. 141,000/-PM |
| Post Code | Name of the Post | Qualification |
|---|---|---|
| 101 | Trainer Electrician | Candidates should have acquired Degree in Electrical/ Electrical and Electronics Engineering from recognized Engineering College/ university with one year post qualification experience in the relevant field. OR Diploma in Electrical/ Electrical and Electronics Engineering from recognized board of technical education with two years post qualification experience in the relevant field. |
| 102 | Candidates should have acquired (i) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern | |
| 103 | Trainer Mechanic Diesel | Candidates should have acquired Degree in Automobile/ Mechanical Engineering (with specialization in Automobile) from recognized college/University with one year experience in the automobile industry and should possess valid LMV Driving license. OR Diploma in Automobile/Mechanical (specialization in automobile) from recognized board of technical education with two years experience in Automobile industry and should possess valid LMV driving license |
| 104 | Candidates should have acquired (i) Matric with Science and Maths from a recognised university/ Board or equivalent. (ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). (iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern |
|
| 105 | Trainer Mechanic Motor Vehicle | Candidates should have acquired Degree in Automobile/ Mechanical Engineering from recognized Engineering College/ university with one year experience in the relevant field. OR Diploma in Automobile/ Mechanical Engineering from recognized board of technical education with two-year experience in the relevant field. |
| 106 | Candidates should have acquired (i) Matric with Science and Maths from a recognised university/ Board or equivalent.(ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). (iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern. |
|
| 107 | Trainer Plumber | Candidates should have acquired Degree in Civil/ Mechanical Engineering from recognized Engineering College/ university with one year Post qualification experience in the relevant field. OR Diploma in Civil/ Mechanical Engineering from recognized board of technical education with two-year Post qualification experience in the relevant field. |
| 108 | Candidates should have acquired (i) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern. | |
| 109 | Trainer Dress Making | Candidates should have acquired (i)Matric from a recognized university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT. (iii) CTI Training in the trade of at least one year duration |
| 110 | Trainer Employability Skill | Candidates should have acquired MBA OR BBA with two-year experience OR Graduate in Sociology/ Social Welfare/ Economics with two-year experience OR Graduate/ Diploma with two-year experience and trained in Employability Skills from DGT institutes. and Must have studied English/ Communication Skills and Basic Computer at 12th/ Diploma level and above. OR Existing Social Studies Instructors duly trained in Employability Skills from DGT institutes. |
| 111 | Trainer Surveyor | Candidates should have acquired Degree in Survey Engineering / Civil Engineering from recognized university with one year experience in relevant field. OR Diploma in Survey Engineering /Civil Engineering from recognized board of education with two years experience in relevant field. |
| 112 | Trainer Pump Operator-Cum-Mechanic | Candidates should have acquired Degree in Automobile/ Mechanical Engineering/ Electrical Engineering from recognized college/University with one year experience in the relevant field. OR Diploma in Automobile/ Mechanical Engineering /Electrical Engineering From recognized board of technical education with two years experience in the relevant field. |
| 113 | Candidates should have acquiredi) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern. |
|
| 114 | Trainer Computer Operator and Programming Assistant | Candidates should have acquired B.E. / B.Tech in Computer Science / IT from Recognized University with one year Post qualification experience in the relevant field. OR Post Graduate in Computer Science /Computer Application / IT or NIELIT B Level with one year Post qualification experience in the relevant field. OR Bachelor in Computer Science / Computer Application / IT OR PGDCA from UGC recognized University or NIELIT A Level with two year experience in the relevant field. OR Three year Diploma from recognized Board/ Institute in Computer Science / IT with two year post qualification experience in the relevant field. |
| 115 | Candidates should have acquired 1Must possess the qualification of 10+2 pass or its equivalent from the Board/University duly recognized by the Central / H.P. Government with:- i) Diploma in Computer Engineering of three years duration or its equivalent from an Institute duly recognised by the Central/H.P. Govt. OR (ii) Diploma in Engineering of three years duration or its equivalent with an additional qualifications of Diploma in Computer Applications of one & half year duration or its equivalent both from an Institute recognised by the Central /H.P. Govt. OR |
|
| 116 | Trainer Maths / Engg. Drawing | Candidates should have acquired Degree in Engineering with one year experience. OR Diploma in Engineering with two years experience. OR NTC/NAC in the Draughtsman (Mechanical/Civil) with three years experience. |
| 117 | Trainer Engineering Drawing | Candidates should have acquired(i) Matric with Science and Math from a recognized university/ Board or equivalent. ii) 3 years Diploma in Mechanical/Automobile/Production Engineering from recognised State board of Technical Education or equivalent. Or (ii) a.National trade certificate in Draughtsman (Mechanical) or equivalent recognised by NCVT or equivalent preferably National Apprenticeship Certificate under Apprenticeship Training Scheme after National Trade Certificate with 2 years’ experience in the trade. b. Craft Training Institute Training of atleast one year duration in the trade concerned. |
| 118 | Trainer Maths | Candidates should have acquired (i) Matric with Science and Math from a recognized university/ Board. (ii) 3 years Diploma in Engineering recognised from State Board of Technical Education or equivalent. OR B) Pre Engineering/B. Sc. Part-I with Science and Math or equivalent from a recognised university. Candidates should have acquired(ii) National Trade Certificate of two years duration in Engineering trade or equivalent preferably National Apprenticeship Certificate under Apprenticeship Training Scheme to be preferred with one year experience in an Industrial Training Institute or in reputed Industrial concern. iii) CTI Training of at least one year duration in trade concerned. OR B.A. /B.Sc. with Math and B.Ed. |
| 119 | Trainer IT/ Computer Lab. | Candidates should have acquiredGraduate in Engineering or Graduate in Computer Science with atleast one year experience . OR Diploma in Computer Engineering with two years experience. OR NTC /NAC in COPA with three years experience. The experience should be in a reputed Industrial concern or in a Training Institute. |
| 120 | Trainer Stenographer Secretarial Assistant (Hindi) | – |
| 121 | Trainer Sewing Technology | Candidates should have acquired Degree in Fashion & Apparel Technology from recognized College /university with one-year experience in the relevant field. OR Diploma in Garment Fabrication Technology / Costume Design & Dress Making from recognized board of technical education with two years experience in the relevant field. |
| 122 | Trainer Surface Ornamentation Techniques (Embroidery) | Candidates should have acquired Diploma in Dress Making / Garment fabricating technology / costume designing from AICTE with Two years Experience in relevant field. OR Degree in Fashion & apparel Technology With one year experience in relevant field. |
| 123 | Trainer Basic Cosmetology | Candidates should have acquired Diploma in the Beauty Culture / Cosmetology approved by AICTE with two Years experience in the field. OR Post Graduate Diploma Govt. recognized in the field with two years field experience. |
| 124 | Trainer Front Office Assistant | Candidates should have acquired Degree in Commerce / Hotel Management/ Catering Technology from recognized university with one-year experience in the relevant field. OR Diploma in Hotel Management/ Catering Technology/ Commercial Practice from a recognized board of education with two-year experience in the relevant field |
| 125 | Trainer Draughtsman (Civil) | Candidates should have acquired Degree in Civil Engineering from recognized Engineering College /University with one-year experience in the relevant field. OR Diploma in Civil Engineering from recognized Board of Technical Education with two years experience in the relevant field |
| 126 | Candidates should have acquired(i) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). (iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern. |
|
| 127 | Trainer Stenographer Secretarial Assistant (English) | – |
| 128 | Trainer Information and Communication Technology System Maintenance | Candidates should have acquired Graduate in Engineering / Technology in Computer Science/ IT/Electronics & Communication from Recognized university with one-year experience in the relevant field. OR Post Graduate in Computer Science /Computer Application/ IT/Electronics from Recognized university with one year experience in the relevant field. OR Bachelor in Computer Science / Computer Application / IT OR NIELIT A Level from Recognized university with two years experience in the relevant field. OR Three years Diploma from recognized Board / Institution in Computer Science / IT/ Electronics & Communication from recognized board of education with two years experience in the relevant field |
| 129 | Trainer Fashion Design & Technology | Candidates should have acquired Degree (4 yrs. duration) in fashion Designing/Technology from Recognized university with one year experience in the relevant field. OR Degree (3 yrs. duration) in fashion Designing/Technology from Recognized university with Two-year experience in the relevant field. OR Three year Diploma in fashion Designing/Technology/CDDM from (AICTE) with Two years experience |
| 130 | Trainer Fitter | Candidates should have acquired Degree in Mechanical Engineering from recognized Engineering College /university with one year post qualification experience in the relevant field. OR Diploma in Mechanical Engineering from recognized board of technical education with two years post qualification experience in the relevant field. |
| 131 | Candidates should have acquired i) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern | |
| 132 | Trainer Mechanic Electronic | Candidates should have acquired i) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). (iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. Or For trades which Craft Training Institute Training facility is not available. At least 4 years experience in the trade concern in an Industrial Training Institute and or in a reputed industrial concern |
| 25 | Trainer Turner | Candidates should have acquired(i) Matric with Science and Maths from a recognised university/ Board or equivalent. ii)National Trade Certificate in the trade concerned or equivalent issued recognized by NCVT or National Apprentice Training Scheme (later to be preferred). iii) For trade where CTI training facility is available. Craft Training Institute training of at least one-year duration in the trade concerned with at least two years experience in the trade concerned in an Industrial Training Institute or in a reputed industrial concern. |
| Name of the Post: | Age: |
| Trainer | Candidates age limit should be Between 18 to 45 years. |
| Candidates selection will be done based on their performance in Walk in Interview. |
| Eligible candidates may apply online at DTE HP‘s website (direct link is given below) |
| Name of the Post: | Last Date of Apply online |
| Trainer | Upcoming |
Notification for DTE HP Recruitment
Apply Online for Trainer Recruitment
CTI KI VACANCY KB NIKLEGI